EN10219 S275J0H LSAW steel pipeline

260 Views
11-May-2024

S275J0H LSAW steel pipeline is steel grade in EN10219 standard. EN10219 S275J0H LSAW steel pipeline is Cold formed welded structural hollow sections of non-alloy and fine grain steels.The most widely used specification is EN10219 standard.

EN10219 S275J0H LSAW steel pipeline is from the specification EN10219 which has the yiled strength 275Mpa(for thickness not greater than 16mm), the capital letters J0 for the qualities with specified impact properties(a minimum impact energy value of 27J) at 0 °C, the capital letter H is to indicate hollow sections.

EN10219 S275J0H LSAW steel pipeline Chemical composition(%) Max

Grade	C	Mn	P	S	N
S275J0H	0.2	1.5	0.04	0.04	0.009

EN10219 S275J0H LSAW steel pipeline Mechanical properties

Grade	Yield strength Rel/N/MM^2 Mini		Energy(J)	Tensile strength Mini		Impact temperature
	t<=16mm	t<=16mm T<=40mm	27	>=3mm T<=40	T<=40mm	0
S275J0H	275	265		430-580	410-560

EN10219 S275J0H steel pipeline Specification

1, Sizes: Outer diameter 457mm-1422mm (16”-56”)

2, Wall thickness: 8mm-50mm

3, Length (L): 5800mm-12300mm

4, Steel Grade: S275J0H

5, Standard: EN10219

6, Mill Certificate: 3.1 & 3.2 in acc. to EN10204.

Annual Output: 150,000 tons/year

KUNFENG steel,professional modernized manufacturer and exporter. “Top Quality, Best service ” is the philosophy for our company. “Customer Satisfaction” is our mission. EN10219 S275J0H LSAW steel pipeline was primly dealed in the KUNFENG steel.If EN10219 S275J0H LSAW steel pipeline an meet your need,pls contact with us in 24 hours.