Shipbuilding flat bar

191 Views
24-May-2024

The flat bar steel is rolled with negative deviation, but it is delivered according to the actual weight. The utilization ratio is 1-5 percentage points higher than that of the steel plate.

Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.

Shipbuilding flat bar size:

type	size(mm)			CSA (cm2)	weight(kg/m)	allowable deviation (mm)
type	b	t	r	CSA (cm2)	weight(kg/m)	b	t
8×100	100	8	≤2.0	8	6.28	± 2.0	± 0.3
10×100		10		10	7.85
12×100		12		12	9.42
15×100		15	≤3.0	15	11.78
8×120	120	8	≤2.0	9.6	7.54
10×120		10	≤2.0	12	9.42
15×120		15	≤3.0	15	14.13
10×150	150	10	≤2.0	15	11.78
12×150		12	≤2.0	18	14.13
15×150		15	≤3.0	22.5	14.13
20×150		20	≤3.0	30	23.55
25×150		25	≤4.0	37.5	29.44
30×150		30	≤4.0	45	35.33
10×200	200	10	≤2.0	20	15.7	± 0.3	± 0.3
10×200		12	≤2.0	24	18.84
10×200		15	≤3.0	30	23.55
10×200		20	≤3.0	40	31.4
10×200		25	≤4.0	50	39.25
10×200		30	≤4.0	60	47.1
10×250	250	10	≤2.0	25	19.63
12×250		12	≤2.0	30	23.55
15×250		15	≤3.0	37	29.44
20×250		20	≤3.0	50	39.25
25×250		25	≤4.0	62	49.06
30×250		30	≤4.0	75	58.88
10×300	300	10	≤2.0	30	23.55
12×300		12	≤2.0	36	28.26
15×300		15	≤3.0	45	35.33
20×300		20	≤3.0	60	47.1
25×300		25	≤4.0	75	58.88
30×300		30	≤4.0	90	70.65
10×350	350	10	≤2.0	35	27.48	± 0.4	± 0.3
12×350		12	≤2.0	42	32.97
15×350		15	≤3.0	52.5	41.21
20×350		20	≤3.0	70	54.95
25×350		25	≤4.0	87.5	68.69
30×350		30	≤4.0	105	82.43
10×400	400	10	≤2.0	40	31.4
12×400		12	≤2.0	48	37.68
15×400		15	≤3.0	60	47.1
20×400		20	≤3.0	80	62.8
25×400		25	≤4.0	100	78.5
30×400		30	≤4.0	120	94.2
10×450	450	10	≤2.0	45	35.33
12×450		12	≤2.0	54	42.39
15×450		15	≤3.0	67.5	52.99
20×450		20	≤3.0	90	70.65
25×450		25	≤4.0	112.5	88.31
30×450		30	≤4.0	135	105.98