SA213 T11 Seamless Steel Pipe

SA213 T11 steel is the part of ASTM A213 Standard Specification for seamless Ferritic and Austenitic Alloy-Steel Boiler,Super Heater,Heat-Exchanger Tubes.

Category: Seamless Steel Pipe

Hits: 507

Updatetime: 21-Aug-2023

Grade:  SA213 T11 Steel 

Type: steel pipe, seamless pipe, high pressure vessel pipe 

Standard:  ASTM A213 (ASME SA213)

Steel Plate Thickness:  

O.D.: 28-168mm; W.T.: 2-30mm; L: max 12000mm

Place of Origin:  China

Brand Name:  KUNFENG

SA213 T11 steel Application:

SA213 T11  steels are mostly used in Resistant high and low temperature or resistant Corrosion-resistant in the oil, chemical, electric powder industry.

SA213 T11  Steel Introduction 

SA213 T11  steel is the part of ASTM A213 Standard Specification for seamless Ferritic and Austenitic Alloy-Steel Boiler,Super Heater,Heat-Exchanger Tubes. SA213 T11  steels are mostly used in Resistant high and low temperature or resistant Corrosion-resistant in the oil, chemical, electric powder industry.

SA213 T11  Steel Delivery state

SA213 T11  Steel Material is normally delivered in cold finish or hot finished condition.

SA213 T11  Steel Application

SA213 T11  steels are mostly used in Resistant high and low temperature or resistant Corrosion-resistant in the oil, chemical, electric powder industry.

SA213 T11  Steel Chemical Composition Analysis%

SA213 T11 Grade Chemical Composition%

C Si Mn P,S Cr Mo Ni V Al

T2 0.10~0.20 0.10~0.30 0.30~0.61 ≤ 0.025 0.50~0.81 0.44~0.65 - - -

T11 0.05~0.15 0.50~1.00 0.30~0.60 ≤ 0.025 1.00~1.50 0.44~0.65 - - -

T12 0.05~0.15 ≤ 0.5 0.30~0.61 ≤ 0.025 0.80~1.25 0.44~0.65 - - -

T22 0.05~0.15 ≤ 0.5 0.30~0.60 ≤ 0.025 1.90~2.60 0.87~1.13 - - -

T91 0.07~0.14 0.20~0.50 0.30~0.60 ≤ 0.02 8.0~9.5 0.85~1.05 ≤ 0.4 0.18~0.25 ≤ 0.015

T92 0.07~0.13 ≤ 0.5 0.30~0.60 ≤ 0.02 8.5~9.5 0.30~0.60 ≤ 0.4 0.15~0.25 ≤ 0.015

SA213 T11  Steel Mechanical Properties

Grade Chemical Composition% Mechanical Properties

W B Nb N T. S Y.P Elongation Hardness

T2 - - - - ≥415MPa ≥205MPa ≥30% 163HBW ( 85HRB)

T11 - - - - ≥415MPa ≥205MPa ≥30% 163HBW ( 85HRB)

T12 - - - - ≥415MPa ≥220MPa ≥30% 163HBW ( 85HRB)

T22 - - - - ≥415MPa ≥205MPa ≥30% 163HBW (85HRB)

T91 - - 0.06~0.10 0.03~0.07 ≥585MPa ≥415MPa ≥20% 250HBW (25HRB)

T92 1.50~2.00 0.001~0.006 0.04~0.09 0.03~0.07 ≥620MPa ≥440MPa ≥20% 250HBW (25HRB)

SA213 T11  Steel Packing

SA213 T11  Steel Packing is normally wrapped by plastic film and waterproof paper, and then fastened on wooden pallet or as you request.