60# Steel round bars

168 Views
11-May-2024

60# steel round bar is a hypoeutectoid steel bar, its strength, hardness and flexibility are very high, plasticity is low when in the cold deformation, poor machinability, welding and hardenability, It will have a tendency to crack when in water quenching, large parts are using normalizing.

60# steel round bar information:
Standard: DIN 7527-6,EN 10204, EN 10228-3,EN 10250,N10083,SEW 550
Delivery Condition: Hot forged +Normalized+ Rough turned
Q/T:Quench+ Temper Annealing
Steelmaking Process: electric furnace + LF refining furnace + argon protection casting + VD vacuum degassing furnace ingot (bottom gating)
Diameter: 5mm-1200mm ,the forged round bar is from 80mm-1200mm:
Length: 1000-12000mm
Inspecting: SEP1921 CLASS C/C，D/D，E/E
Min qty: 1pcs
Tolerance for forged round bar: OD: 0/+3.0mm Length: 0/+20.0mm ;Straightness: 3mm/1000mm

60# steel round bar Chemical analysis -% by mass*

Grade	C	Si;	Mn	P	S	Cr	Ni	Cu
Grade	max	max	max	max.	max.	max	max	max
60#	0.57-0.65	0.17-0.37	0.50-0.80	0.035	0.035	0.60-0.90	0.25	0.25

60# steel round bar Merchanical Propertites

Grade	Tensile Strength (Mpa)	Yield Strength (Mpa)	Elongation in 100-150 mm(%)	Reduction in Area	Hardness
60#	≥675	≥400	≥12	≥35	≤229HB

KUNFENG can offer 60# forged and hot rolled round bar in carbon, alloy, stainless steel material, Our Company through quality, environment, occupational health and safety management system, etc. Products have passed the ISO9001:2000 quality management system certification, China CCS, South Korea KR, Italy RINA, Japan NK, France BV, the United States ABS, Russia RS, Lloyd's LR, Germany Lloyd's GL classification society certification.