35Mn round bars

226 Views
11-May-2024

The material 35Mn is a kind of high-quality carbon structural steel under the standard GB/T 699-1988.
35Mn Chemical composition %:

Grade	Chemical composition %:
Grade	C	Si	Mn	S	P	Cr	Ni	Cu
35Mn	0.32-0.40	0.17-0.37	0.70-1.00	≤0.035	≤0.035	≤0.25	≤0.30	≤0.25

35Mn mechanical properties:

Grade	mechanical properties:
	Tensile strength σb (Mpa)	Yield strength σb (Mpa)	Elongation σb (%)	reduction of area ψ (%)	Hardness No heat treatment	Impacting Energy Akv (J)	Notched bar impact strength αkv (J/cm2)
	min	min	min	min	max	min	min
35Mn	560(57)	335(34)	18	45	229HB	55	69(7)

Notes:
1, 35Mn specification: DIA 80-1200mm(forged round bar), 80-1200mm(square bar) Length 3-16 meters
2, 35Mn heat treatment: Quenching,Annealing,Normalizing and Tempering.
3, 35Mn tolerance: 0-+3mm(DIA), 0-+10mm(Length)
The grade 35Mn’s strength and hardenability is higher than 30Mn steel. 35Mn’s cold plastic deformation is medium and 35Mn has good machinability but Poor weldability. 35Mn should be used after tempering treatment.35Mn is suitable for rotor,bolt, nut,screw etc,the spindle and the gear.35Mn is used in the manufacture of medium-sized machinery in bolt, nut, leverage, etc.
Our company, KUNFENG can produce all sizes of 35Mn forged steel round bar, 35Mn forged square bar, 35Mn forged shafts and 35Mn forged blocks.