-
Call Now ! +86 13390692151 -
Email Now sale@kfqizhongji.com
EN10155 S235J2W steel is a hot rolled products of structural steels in technical delivery conditions with improved atmospheric corrosion resistance. EN10155 S235J2W steel is mainly used for manufacturing welded,riveted or bolted structures.
EN10155 S235J2W steel is a hot rolled products of structural steels in technical delivery conditions with improved atmospheric corrosion resistance. EN10155 S235J2W steel is mainly used for manufacturing welded,riveted or bolted structures. Moreover, it has a wide range of applications: architecture, smokestacks, fabrication,freight wagons, silos, pylons and bridges.
EN10155 S235J2W steel Chemical Composition by [%]
C % | Mn % | Cr % | Si % | CEV % | S % | |
Max 0.13 | 0.2-0.6 | 0.4-0.8 | Max 0.4 | Max 0.44 | Max 0.3 | |
Cu % | P % | |||||
0.25-0.55 | Max 0.035 | |||||
Method of deoxidation FF = fully killed steel For long products the P and S content can be 0.005% higher The S235J2W steels may show a Ni content of max. 0,65 % The S235J2W steels shall contain at least one of the following elements: Al total ≥ 0,020 %, Nb: 0,015 - 0,060 %, V: 0,02 - 0,12 %, Ti: 0,02 - 0,10 %. If these elements are used in combination, at least one of them shall be present with the minimum content indicated.
EN10155 S235J2W steel Mechanical Properties
Grade | Min. Yield Strength Mpa | Tensile Strength MPa | Impact | ||||||||||||
S235J2W | Nominal Thickness (mm) | Nominal Thickness (mm) | degree | J | |||||||||||
Thick mm | ≤16 | >16 ≤40 | >40 ≤63 | >63 ≤80 | >80 ≤100 | >100 ≤150 | ≤3 | >3 ≤100 | >100 ≤150 | -20 | 27 | ||||
S235J2W | 235 | 225 | 215 | 215 | 215 | 195 | 360-510 | 360-510 | 350-500 | ||||||
The tensile test values given in the table apply to longitudinal samples; in case of strip and sheet steel of widths of ≥600 mm they apply to transverse samples. If S235J2W mechanical properties have been significantly modified by heavy coldforming, either stress relief annealing or normalised may be applied. Normalised should also be applied following hotforming outside of the temperature range of 750 - 1.050 °C and after overheating.
KUNFENG STEEL can offer EN10155 S235J2W steel. We registers hundreds of thousands of tons of ex-stock source on our spot trade flatform. If required, we can also offer chemical analysis, mechanical properties and other detailed information.
