Follow us:-
Hardox 400 Steel Plate

Hardox 400 Steel Plate

Hardox 400 is an abrasion resistant plate with a hardness of 400 HBW,It is intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties.HARDOX 400 offers very good weldability.

Category: Alloy Steel
Hits: 590
Updatetime: 27-Jul-2023

Grade: Hardox 400 Stee

Type : HARDOX 400 steel,steel plate, Wear Resistant Steel

Standard:  HARDOX 

Steel Plate Thickness:  

Thickness: 3~130MM

Width: 205~2200MM

Length: 1800~5800MM

Place of Origin:  China

Brand Name:  KUNFENG

Hardox 400 steel Application:

Hardox 400 steelis a kind of Mould steel. Hardox 400 steel plate/sheet is used for applications where demands are imposed on abrasion resistance in combination with good cold bending properties.

Hardox 400 Steel Introduction 

Hardox 400 steel is a kind of Mould steel. Hardox 400 steel plate/sheet is used for applications where demands are imposed on abrasion resistance in combination with good cold bending properties.

Hardox 400 Steel Delivery state

Hardox 400 delivery condition is Q or QT (Quenched or Quenched and Tempered). The plates are delivered with sheared or thermally cut edges. Untrimmed mill edges are available by agreement. Width ≤ 1600 mm and thicknesses 3 - 8 mm delivered as cut-to-length with an rolled surface and mill edges as standard. Cut edges are an option. Thicknesses over 80 mm are delivered with mill edge as standard

Hardox 400 Steel Application

Hardox 400 steel is a kind of Mould steel. Hardox 400 steel plate/sheet is used for applications where demands are imposed on abrasion resistance in combination with good cold bending properties.

Hardox 400 Steel Chemical Composition Analysis

C Max% Si Max% Mn Max% P Max% S Max % Cr Max% Ni Max% Mo Max % B Max%

0.32 0.70 1.6 0.025 0.010 1.40 1.50 0.60 0.004

Hardox 400 Steel Mechanical Properties

Grade Tensile strength Yield strength Elongation Impact energy

Hardox 400 1000 1250 10% 45

Hardox 400 Steel Packing

Hardox 400 Steel Packing is normally wrapped by plastic film and waterproof paper, and then fastened on wooden pallet or as you request.


Related Post

A299 Chemical composition,A299 Mechanical properties

A 299 is an important grade under ASTM standard, one class of boiler and pressure vessels. Refer to A299 Chemical composition,A299 Mechanical properties, A299 is suggested that all the plates to be done ultrasonic test and PWHT for improving steel properity and safety.

A202 gr.A Chemical composition,A202 gr.A Mechanical properties

A202 gr.A Chemical composition,A202 gr.A Mechanical properties: KUNFENG steel is specialized in supplying ASTM A202 steel plate in A202 grade A. For more information of A202 grade A steel plates.

A302 Gr B steel plates standard specification for pressure vessel plates in alloy steel

A302 Gr B steel plates standard specification for pressure vessel plates in alloy steel, manganese molybdenum and manganese-molybdenum-nickel. A302 Gr B steel plate shall be normally supplied in the as-rolled condition. Plates may be ordered normalized or stress relieved, or both.

Hardox 400 Steel Plate

Hardox 400 is an abrasion resistant plate with a hardness of 400 HBW,It is intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties.HARDOX 400 offers very good weldability.