Follow us:-

Alloy Steel

Home > Steel Materials > Alloy Steel
A202 gr.A Chemical composition,A202 gr.A Mechanical properties

A202 gr.A Chemical composition,A202 gr.A Mechanical properties

A202 gr.A Chemical composition,A202 gr.A Mechanical properties: KUNFENG steel is specialized in supplying ASTM A202 steel plate in A202 grade A. For more information of A202 grade A steel plates.

Category: Alloy Steel
Hits: 627
Updatetime: 21-Aug-2023

A202 gr.A Chemical composition,A202 gr.A Mechanical properties:   

KUNFENG steel is specialized in supplying ASTM A202 steel plate in A202 grade A. For more information of A202 grade A steel plates, please check them in following   

A202 gr.A Chemical composition,A202 gr.A Mechanical properties: C  0.17 Si0.54-0.90 Mn0.97-1.52 P 0.035 S0.035   

Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】% Thickness:6-50mm 50-100mm Yield: Min 310 Tensile: 515-655 Mpa Elongation Min 16%-19%   

ASTM A202 standard specification for pressure vessel plates, alloy steel, chromium-manganese-silicon   

ASTM A202 plates are normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both.   If you have any enquiry,please contact one of the biggest A202 gr.A distributors, KUNFENG International. All of the A202 gr.A steel we offer are in good quality for sale. You can trust us and contact us, we will not let you down.

Prev Post

A 387 gr.12 Chemical composition,A 387 gr.12 Mechanical properties

next Post

A202 gr.B Chemical composition,A202 gr.B Mechanical properties

Related Post

A299 Chemical composition,A299 Mechanical properties

A 299 is an important grade under ASTM standard, one class of boiler and pressure vessels. Refer to A299 Chemical composition,A299 Mechanical properties, A299 is suggested that all the plates to be done ultrasonic test and PWHT for improving steel properity and safety.

A 387 gr.11 Chemical composition,A 387 gr.11 Mechanical properties

As a quality chrome moly steel, A387 Grade 11 Class 2 is used in a variety of industries and is highly effective, particularly in the oil, gas and chemical industry, where liquids and gases are often stored at high temperature (see pressure vessels).

Hardox 400 Steel Plate

Hardox 400 is an abrasion resistant plate with a hardness of 400 HBW,It is intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties.HARDOX 400 offers very good weldability.

Hardox 500 steel

Hardox 500 is a wear plate that can withstand hard wear and has a typical hardness of 500 HBW.It is well suited for applications in which it is exposed to hearvy wear by hard minerals and other abrasive materials.In certain cases,Hardox 500 can last more than three times longers than Hardox 400.