RMRS Grade A shipbuilding steel plate

207 Views
13-May-2024

RMRS Grade A shipbuilding steel plates also can be used for ship repairing, the offshore oil drilling platform, the platform pipe joints and other components.The RMRS Grade A shipbuilding steel plates have yield strength of 34,100 psi (235 MPa), and ultimate tensile strength of 58,000 - 75,500 psi (400-520 MPa).

The application of RMRS Grade A shipbuilding steel plate

RMRS A grades of steel plate are almost exclusively used in the Shipbuilding Industry for the construction of structural parts of ships, barges and marine equipment.

RMRS Grade A shipbuilding steel plate Chemical Composition Heat Analysis

Element	RMRS Grade A Max %	Element	RMRS Grade A Max %
C	0.21	Ni	-
Mn	2.5*C min	Mo	-
Si	0.50	Al	-
S	0.035	Nb	-
P	0.035	V	-
Cu	-	Ti	-
Cr	-	N	-

RMRS Grade A shipbuilding steel plate Mechanical Properties

Grade	Thickness	Yield Strength	Tensile Strength	Elongation	Impact Energy
	(mm)	MPa (min)	MPa	% (min)	(KV J) (min)
					20 degree
RMRS Grade A	4-260	235	400-5

The rolling size of RMRS Grade A shipbuilding steel plate

Thickness	3-150mm
Width	1220-4200mm
Length	5000-18000mm

Notes: coil thickness ≤ 25mm
All the RMRS Grade A shipbuilding steel plate offered by KUNFENG Industry can be certificated by Register of Shipping (RMRS).welcome to contact KUNFENG if you are loooking for the best suppliers of RMRS Grade A shipbuilding steel plates. We will try our best to reply you at the first time. RMRS Grade A shipbuilding steel plate's quality can be guaranteed.