NFA35-502 E 36 WB 3 steel, E 36 WB 3 steel plate/sheet, E 36 WB 3 steel plate supplier, E 36 WB 3 st

• E 36 WB 3 steel description

  E 36 WB 3 steel is a weather resistant steel which could more accurately be termed as an "Atmospheric Corrosion Resistant Steel" and often referred to as Corten-B steel. Weathering means that due to E 36 WB 3 steel chemical compositions, E 36 WB 3 steel chemical composition can increase resistance to atmospheric corrosion compared to other steels. This is because it forms a protective layer on E 36 WB 3 steel surface under the influence of the weather.

  E 36 WB 3 steel deliver condition

  Hot Rolled, Cold Rolled, Normalized, Quenched, Tempering, Thermal Mechanical Control Process (TMCP), Electroslag Remelting Technical, HIC test.

• E 36 WB 3 steel Application range

  The E 36 WB 3 steels are used for various types of welded, bolted and riveted constructions e.g. steel frame structures, bridges, tanks and containers, exhaust systems, vehicles and equipment constructions and so on.

• E 36 WB 3 steel chemical composition(%)

   

  C	Si	Mn	P	S	Cr	N	Cu	CEV
  max 0.16	Max 0.5	0.5 - 1.5	max 0.035	Max 0.035	0.4 -0.8	max 0.009	0.25-0.55	Max 0.52
  Note: 1. The steels may show a Ni content of max 0.65 %; 2. For long E 36 WB 3 steel, the P and S content can be 0.005% higher; 3. The E 36 WB 3 steel may contain max. 0.30 % Mo and max. 0.15 % Zr 4. It is permissible to exceed the specified values provided that for each increase of 0.001 % N, the P max. content will be reduced by 0.005 %; the N content of the ladle analysis, however, shall not be more than 0.012 % 5.The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0.020 % or if sufficient other N binding elements are present.

• E 36 WB 3 steel mechanical property

   

  Nominal thickness (mm)	to 16	16-40	40-63	63-80	80-100	100-150
  ReH - Minimum yield strength (MPa)	355	345	335	325	315	295
  Nominal thickness (mm)	To 3		3-100		100-150
  Rm -Tensile strength (MPa)	510-680		470-630		450-600
  Nominal thickness (mm)	3-40		40-63		63-100	100-150
  A - Minimum elongation Lo = 5,65 √ So (%)	22		21		20	18
  Nominal thickness (mm)	1.5 - 2		2-2.5		2.5-3
  A - Minimum elongation Lo = Lo = 80 mm (%)	16		17		18
  Temperature	-20			0
  Notch impact test. Min. absorbed energy	27			27

KUNFENG is an outstanding and professional E 36 WB 3 steel exporter and stockist in china, especially in super thick atmospheric corrosion resistance of structural steel plate. We keep more than 10000 ton E 36 WB 3 steel in stock, and we have a good relationship with per big steel mill, so if you have any E 36 WB 3 steel need, we also can meet your maximum request. KUNFENG international is your best choice, if you want to seek a reliable china supplier. Any need in E 36 WB 3 steel, we can supply you with the best quality, best service and competitive price.