EN10025 S355JR Steel Work / Steel Structure / Steel Machining Parts

EN10025 S355JR Steel Work / steel structure / Steel Machining Parts
EN10025 S355JR Steel machining parts has high yield and tensile strength with minimum yield strength of 355 N/mm², EN10025 S355JR Steel Structure which is widely used in engineering and construction industries can be supplied with a variety of heat treatments.

EN10025 S355JR Steel Work Chemical Composition Analysis

Grade		% by max
Name	Number	C	Si	Mn	P	S	N	Cu
EN10025 S355JR	1.0045	0.27	0.60	1.70	0.045	0.045	0.014	0.60

EN10025 S355JR Steel Structure Mechanical Properties

Grade		Yield strength MPa		Tensile strength MPa	Elongation %	Minimum impact J Thickness≤ 150 mm
		Thickness mm		Thickness mm	Thickness mm
Name	Number	≤16	＞16 ≤40	≥3 ≤40	≥3 ≤40	Test temperature 20℃
EN10025 S355JR	1.0045	355	345	470-630	22	27

EN10025 S355JR Steel Work Symbol

S symbol for Structure Steel; JR symbol 20 degree temperature impact test; J0 symbol 0 degree temperature impact test; J2 symbol -20 degree temperature impact test.

EN10025 S355JR Steel Structure Substrate Dimension KUNFENG could supply

Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm or as customer designed.
EN10025 S355JR Steel machining parts has a very clean smooth surface finish after laser cutting; it can be bended without giving up tension during processing. KUNFENG can also provide Plasma Cutting, Flame cutting and so on. We offer S355JR Steel work bending, bevel, drilling and other service. If you want to know more about EN10025 S355JR Steel Structure just contact us!