EN10025-5 S235J0W/S235J2W steel work / steel structure / steel  machining parts

EN10025-5 S235J0W/S235J2W steel work / steel structure / steel machining parts

180 Views
10-May-2024

S235J0W/S235J2W steel work/steel structure/steel machining parts under specification, EN10025-5 is mainly used for manufacturing welded,riveted or bolted structures,such as bridge built,façade and vehicle construction.

EN10025-5 S235J0W/S235J2W steel specifies requirements for flat and long products of hot rolled steels with improved atmospheric corrosion resistance.

EN10025-5 S235J0W/S235J2W steel work/steel structure/steel machining partschemical composition max

	C	Si	Mn	P	S	N	Cr	Cu
S235J0W	0.16	0.45	0.15-0.7	0.040	0.040	0.010	0.35-0.85	0.20-0.60
S235J2W	0.16	0.45	0.15-0.7	0.040	0.035	---	0.35-0.85	0.20-0.60

EN10025-5 S235J0W/S235J2W steel mechanical properties

	Minimum yield strength ReH mpa						Tensile strength Rm mpa
	Nominal thickness mm						Nominal thickness mm
S235J0W/S235J2W	Under 16	16 to 40	40 to 63	63 to 80	80 to 100	100 to 150	Under 3	3 to 100	100 to 150
S235J0W/S235J2W	235	225	215	215	215	195	360-510	360-510	350-500

EN10025-5 S235J0W/S235J2W steel heat treatment:

EN10025-5 S235J0W/S235J2W steel are not intended to be heat treated except products delivered in the delivery condition +N. Stress relief annealing is permitted. Products delivered in +N condition can be hot formed and/or normalized after delivery.

EN10025-5 S235J0W/S235J2W steel work/steel structure /steel machining parts third party inspection:

We can arrange the LRS,ABS,BV,DNV,SGS,TUV etc,to do the third party inspection.the inspection items include UT test,PMI test,chemical composition test,mechanical property test,appearance inspection etc.

We have many EN10025-5 S235J0W/S235J2W steel products material in stock,besides, KUNFENG have the ability to produce every kinds of steel structural parts according to the drawings,if you need EN10025-5 S235J0W/S235J2W steel work/steel structure/steel machining parts,please feel free to contact us!