Follow us:-

GB/T700 Q275 carbon and low alloy steel plate

  • 298 Views
  • 10-May-2024

GB/T700 Q275 carbon and low alloy steel plate’s equivalent material is S275JR steel plate. S275JR steel plate is a general carbon structural steel. This kind of steel is similar to the steels listed in GB/T700 and GB/T1591 in China. It is also a carbon structural steel and low-alloy structural steel for engineering and structural steel, usually without heat treatment. goods. S275 is equivalent to Q275. The room temperature 20 °C, 0 °C, -20 °C impact test. GB/T700 Q275 carbon and low alloy steel plate’s buyer can get more information from KUNFENG.  we would supply the information of GB/T700 Q275 carbon and low alloy steel plate you want.

The application of GB/T700 Q275 carbon and low alloy steel plate

GB/T700 Q275 Steel Plate are used in Construction of Bridges, Highway Construction and Other Engineering construction

GB/T700 Q275 carbon and low alloy steel plate Chemical Composition and Mechanical Property


Grade

Chemical Composition(%)

C

Mn≥

Si

P

S

GB/T700 Q275 

0.28-0.38

0.50-0.80

0.35

0.050

0.045

Grade

Mechanical Property

 

Tensile Strength(MPa)

Yield Strength(MPa)

% Elongation in 2 in.(50mm) min

Impacting Test  Temperature(°C)

 

GB/T700 Q275 

490-630

275

20

-20

 

The rolling size of GB/T700 Q275 carbon and low alloy steel plate

Thickness

1.2-600mm

Width

1220-4200mm

Length

5000-18000mm

Notes: coil thickness ≤ 25mm

KUNFENG located in shanghai and has warehouse in Dalian, Qingdao and shanghai. GB/T700 Q275 carbon and low alloy steel plate will be Transported to destination with the fastest speed. Most of GB/T700 Q275 carbon and low alloy steel plate’s buyers set up good relationship with KUNFENG. welcome to send us our inquiry if you want to make order recently.

Related Post

RINA Grade E shipbuilding steel plate

RINA Grade E shipbuilding steel plate is a kind of hot rolled general tensile strength steel. The RINA Grade E shipbuilding steel plates have yield strength of 34,100 psi (235 MPa), and ultimate tensile strength of 58,000 - 75,500 psi (400-520 MPa).

25SiMn2MoV Steel round bar

25SiMn2MoV Steel round bar is one of our main products, and we have more than 1000 tons 25SiMn2MoV Steel round bar in stock every month. More informational about 25SiMn2MoV Steel round bar, please see the following.

EN10219 S355J0H LSAW steel pipeline

S355J0H LSAW steel pipeline is under EN10219 specification. EN10219 S355J0H LSAW steel pipelineis cold formed hollow section.The characters J0 for the qualities with specified impact properties at 0 degree,H means hollow section.