GB4237 1Cr17 FERRITE stainless steel sheet on sale

177 Views
10-May-2024

GB4237 1Cr17 FERRITE stainless steel sheet tensile strength is greater than 450, 1Cr17 yield strength is greater than 205, and the HBS is less than 183 (data is annealed). 1Cr17 FERRITE stainless steel sheet Often used as architectural decoration, heavy oil burner parts, etc. The composition of GB4237 1Cr17 FERRITE stainless steel sheet is characterized by high chromium and low carbon, and the structure is single-phase ferrite.

The application of GB4237 1Cr17 FERRITE stainless steel sheet

1.A general-purpose steel with good corrosion resistance. Used in interior decoration, heavy oil 2.burner parts, household appliances and household appliance parts.
3.Decorative materials and outdoor advertising billboards;
4.For products with stress corrosion resistance requirements;
5.Electronics, cutlery, bolts, nuts, screens and burners.

GB4237 1Cr17 FERRITE stainless steel sheet chemical composition

C(%)	Si(%)	Mn(%)	P(%)	S(%)	Cr(%)
≦0.12	≦0.75	≦1.0	≦0.035	≦0.03	16.0-18.0

GB4237 1Cr17 FERRITE stainless steel sheet Mechanical property

Tensile strength σb (MPa)	≥450
Conditional yield strength σ0.2 (MPa)	≥ 205
Elongation δ5 (%)	≥22
Area shrinkage ψ (%)	≥ 50
Hardness	≤ 183HB

Cold rolled GB4237 1Cr17 FERRITE stainless steel sheet Specification

Thickness	0.3-8mm
Width	600-2100mm
Length	2000-18000mm

Tolerance: according to relevant standard
Surface: 2D, 2B, BA, No3, No4, polish and so on.

Hot rolled GB4237 1Cr17 FERRITE stainless steel sheet Specification

Thickness	2.5-25mm
Width	1000-2100mm
Length	4000-12000mm

Tolerance: according to relevant standard
Surface: No.1

GB4237 1Cr17 FERRITE stainless steel sheet Heat treatment

Annealing at 780 ~ 850 ° C air cooling or slow cooling.
GB4237 1Cr17 FERRITE stainless steel sheet Corresponding national brand
Corresponding Japanese brand: SUS430
Corresponding to the German brand: X8CR17
Corresponding to the US brand: CB30
Corresponding to the British brand: 430Si5
Corresponding to the French brand: Z8C17